What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 24.06.2025 09:02

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
What’s up in the sky for June 2025? Arietid meteor shower, strawberry moon and much more - WTOP
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
A circuit breaker is similar, but is resettable.
2024–10–10[John johnson John Johnson ]
Forget Florida — these two unexpected states are the new retirement hot spots - Yahoo Finance
He then describes the function of a fuse.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
But it can get overloaded, and no longer works.
The Strait of Hormuz is a vital route for oil. Closing it could backfire on Iran - AP News
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
But… the neutral is now “floating” because of the 1 ohm resistance.
These devices are installed between the “hot” and “neutral” and protective ground.
Warming climate may flip the script on the amount of CO₂ released by trees, study finds - Phys.org
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Is love natural, or is it somehow created?
Barnstars:
So, the voltage could go up to 500 volts, and the fuse will not open up.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
[old diagram got deleted by accident]
The third is lightning and “how it gets conducted into a home.”
In schematic diagrams this is the symbol for a fuse:
China extracts critical mineral rubidium from brine for first time - South China Morning Post
There are two important concepts here.
For this case there are devices called Metal oxide varistors (MOV).
These are simplified answers to the original question, and does not change anything I wrote above.
Which is the worst Bollywood movie you have ever seen and why?
There are three different concepts here that are getting confused.
This device then solves the entire problem.
He then describes Rainy Season and Lightning.
On Which Part of the Body Might One Wear Winklepickers? - Slate Magazine
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
a photo is worth a thousand words.
One
Why is it called iOS 26? What happened to iOS 19 for iPhone - 9to5Mac
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
I post the exact comment here.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Now when you have a certain ac resistance, then a current flows in a loop.
What is lightning?
This is where the MOV conducts again, and dissipated the energy.
It seems Mohan does not understand the difference between a comment and an Answer.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
This is the picture of an electronic coil of wire wound around a core of magnetic material.
What does a fuse do?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This is where this question deviates from being a 'generic' question, and becomes more specific.
At one ohm, the resistor has a maximum of 1 watt power.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
nine
The bolt then partially travels down the line to your home.
[image of Common-mode choke]
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
so, what happens?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
The other is “what does a “fuse” do?”
He then asserts :
the problem then depends on "how fast does the fuse operate?".
This is 'the assistant's answer'
2024–10–16 [ OO OLAOYE OYEBODE ]
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This one hit behind the barn.
what exactly is a ‘surge’ protector?
Edit 2024–10.
Because the load is inductive, the current lags the voltage.(by a bit).
The MOV will conduct when the voltage exceeds 50% of line voltage.
At least they know the answer if they wanted it.
It also is a device that limits the change in current flow.
Here is a simplified AC power diagram.
(Dc diagram shown, AC is similar).
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
eight
but this device (an Inductor) … impedes the rapid changes in the current.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
One is “what exactly is in a ‘surge protector’ ? ”
An AC voltage/ current source, and an ac inductive load.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
First Sentence:
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Upvotes:
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
but I think this circuit , shows a few more pieces.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
A fuse is a non-resetable over current circuit protector.
2024–10–14 [Omar Gharbi Omar Gharbi ]